Crimps

Sterling Silver Jewellery Findings
Cord Ends: Sterling Silver for cord, leather or pvc. 14x3x3 mm 0.5g. CODE: C006
Bail: 22x10x11 mm 2.0g. CODE: Bail1
Bail: 10x6x2 mm 0.6g. CODE: Bail2
Bail: 20x20x10 mm 1.9g. CODE: Bail3
Bail: Burgard Studio's bail 9x10mm. CODE: Bail4
Bail: Burgard Studio's Bail for beads 1.27cm (1/2") CODE: Bail6
Bail: Burgard Studio's Bail for beads 1.9cm (3/4"). Insert bead between posts and squeeze together. CODE: Bail7
Bail: Burgard Studio's Bail for beads 3.175cm (1 1/4") CODE: Bail8
Bail: Burgard Studio's Satelite Bail. Make beads at the end of your mandrel. CODE: Bail9
Bail: Burgard Studio's Pendant Blank Glue cabochons, half beads, buttons or fused glass. 18mm diameter. CODE: Bail10
Bail: Burgards Interchangeable Bead Hugger: Fits 2cm bead with 1.5mm hole. The centre ring comes out so you can swap the bead over to something else. CODE: Bail14
Bail: Burgard's Interchangeble Sterling silver bail. A generous bail for larger chains. Comes with a set of 3 rods 1 1/4", 1 3/4", 2 1/4" and will fit beads with a 3/32, hole. CODE: Bail15
Bail: 17.5x12x8.5mm CODE: Bail16
Bail: 22x10x11 mm 2.0g. CODE: B0100
Bail: Use round-nose pliers to gently re-round and close the loop. Approximately 17mm long x 7 mm wide by 5mm deep. CODE: Bail17
Bail: Open ring on the bottom. Approximately 11mm long x 6mm wide x 5mm deep. CODE: Bail18
Jump Rings: Open Sterling Silver Jump Rings (Bags of 10) 4mm
4mm 24kt Gold Plated (Pictured)
5mm
5mm 24kt Gold Plated (Pictured)
6mm
7mm
Jump Rings: Soldered Sterling Silver Jump Rings (Bags of 10) 4mm
5mm
6mm