High quality, Australian designed and handcrafted. The presses are standardised to 60mm long,  38mm wide and weigh approximately 400g.

For perfectly parrallel and consistent thickness beads then the masher is for you. It comes with a number of height adjusters so you can control the thickness of your beads.

CODE: Mould 0

Lentil diameters are approximately 13, 16 and 19mm and create a lentil that is approximately 8mm wide. Designed for  1.6mm mandrel only.

CODE: Mould 1

Lentil diameters are approximately 14 (8.8mm wide), 17 (10mm wide) and 21 (11mm wide) and create a lentil that is approximately mm wide. Designed for  1.6mm mandrel only.

CODE: Mould 9

EXTRA DEEP

diameter x width: 15 x 11mm , 17.5mm x 12mm and 22mm x 13mm 

CODE: Mould 91

Lentil diameters are 19mm with varying thicknesses.  

Side lengths 1, 2, and 3mm

Total Thicknesses 9.5, 10.5, 11.5mm

 Designed for  1.6mm mandrel only.

CODE: Mould 21

As for number 21 but with shallower depths

Side lengths 1, 2, and 3mm

Total thicknesses 7, 8, 9mm.

CODE: Mould 23

3 x 16mm diameter straight sided lentils

Side lengths 1, 2, 3mm

Total Thicknesses 9, 10, 11mm

Note - other combination of diameters 12, 16, 19mm and depths are possible

CODE: Mould 22

One each of 12, 16, 19mm diameter

Side lengths all 2mm

Total thicknesses 7.5, 10, 10.5mm

CODE: Mould 25

Note - Other combinations are possible

Three different diamond shapes. 10mm diameter, 5mm deep with base lengths 0, 5, 10mm

CODE: 32

Lentil diameters are approximately 22 and 25mm and create a lentil that is approximately 9mm in thickness. Designed for  1.6mm mandrel only.

CODE: Mould 3

Also available is a 10mm thick version.

CODE: Mould 35

Lentil diameters are approximately 25mm with straight sides (1mm and 2mm) and create a lentil that is approximately 10 and 11mm in thickness. Designed for  1.6mm mandrel only.

CODE: Mould 26

The smaller lentil is approximately 22mm in diameter and approximately 12 mm in thickness. The large is about 32mm diameter and is approximately 17mm in  thickness. The mandrel grooves are cut 1.3mm deep for 24mm mandrel.

CODE: Mould 4

This press produces a lentil shape 42.5mm in diameter with a total thickness of 12mm. Designed for 2.4mm mandrel

CODE: Mould 81

This press produces a lentil shape 37mm in diameter with a total thickness of 8mm. Designed for 2.4mm mandrel

CODE: Mould 83

This press produces a lentil shape 40mm in diameter with a total thickness of 11mm and has a flat edge approximately 2mm in length. Designed for 2.4mm mandrel

CODE: Mould 84

The marble or sphere mould creates three sizes: 12, 16 and 19mm diameters. Designed for  1.6mm mandrel only

CODE: Mould 5

The coin, tab or round tile mould has three sizes: 13, 16 and 19mm diameters with a 6mm thickness. Designed for  1.6mm mandrel only

CODE: Mould 6

If thicker Coins are required 8mm thickness is also available on request.

CODE: Mould 64

This creates a beautiful bead that will sit flat against your skin while giving the outward appearance of a lentil. The three sizes being: 13, 16 and 19mm diameters with a 6mm thickness for the smallest diameter and 7mm for the others. Designed for  1.6mm mandrel only. NEW!

CODE: Mould 7

If thicker beads are required 7mm and 8mm thicknesses are also available.

CODE: Mould 74

This is a miniature version of the Coin Mould, with the three sizes being: 8, 10 and 12mm diameters with a 6mm thickness. Designed for  1.6mm mandrel only. NEW!

CODE: Mould 8

Small is 14mm wide and 4mm half depth (8mm thick bead). Large is 18mm wide and 5mm deep (10mm thick bead). End plate is on the bottom of the press only. Designed for  1.6mm mandrel.

CODE: Mould 10

Small is 20mm wide and 5mm half depth (10mm thick bead). Large is 25mm wide and 5mm deep (10mm thick bead). The beads can be up to 60mm in length

End plate is on the bottom of the press only. Designed for  1.6mm mandrel.

CODE: Mould 10

Small is 14.8mm wide and 3.5mm half depth (7mm thick bead). Large is 22mm wide and 3.5mm deep (7mm thick bead). End plate is on the bottom of the press only. Designed for  1.6mm mandrel.

CODE: Mould 12

Small is 13mm wide and creates a 6mm thick bead. The larger is 16mm wide and creating 7mm thick bead. Designed for  1.6mm mandrel only. NEW!

CODE: Mould 15

Great for long pendants that will sit flat 

The Tile Squeeze caters for 13mm and 16mm wide with a half depth of 3mm (or 6mm thick).  Designed for  1.6mm mandrel only

CODE: Mould 20

The Cube press has three sizes:  5mm, 7mm and 9mm. These are the width and thickness of the beads. The end plates help with creating a flat end - these can be optional and are attached to the bottom only. Designed for  1.6mm mandrel only. NEW!

CODE: Mould 40e - with end plates.

CODE: Mould 40 - without end plates

The Cube press has two sizes: 10mm and 12mm. These are the width and thickness of the beads. The end plates help with creating a flat end - these can be optional. Designed for  1.6mm mandrel only. NEW!

CODE: Mould 41e - with end plates.

CODE: Mould 41 - without end plates

The Cube press has two sizes: 6mm and 18mm. These are the width and thickness of the beads. The end plates help with creating a flat end - these can be optional. Designed for  1.6mm mandrel only. NEW!

CODE: Mould 42e - with end plates.

CODE: Mould 42 - without end plates

The Cross, similar in design to the cube has 6mm sides. The cross is 60mm in length with the arms are approximately 32mm across. NEW!

Exceptionally easy to use. Make a barrel first then add extra large dots on either side for the arms. The bevel in the press allows a crisp edge that will stay after reheating. Medium Topaz cross bead is illustrated on the right.

CODE: Mould 50

Also available with sides 8mm

CODE: Mould 51

The Cross, similar in design to the Cross with a domed effect as opposed to the crisp edges. The cross is 8mm in diameter, 60mm in length with the arms are approximately 32mm across. NEW!

CODE: Mould 55

14mm x 4mm deep

CODE: Mould 57

17mm x 5.3mm deep x 125mm.

CODE: Mould 125

High quality, Australian made presses made from Stainless steel with a brass base. Available in three styles:

a) 5 Prong

b) 6 Prong

c) 7 Prong

Fantastic for making 5, 6 or 7 pointed star or flowers in your glass by taking a ball of molten glass on a punt and pushing into the press. Encase with another colour and press again. A great tool to effortlessly make murrini. 

High quality, Australian designed and handcrafted Frit Crusher.  40mm outside diameter and the cavity is 30mm diameter by 50mm long

Used to separate coarse from the medium and fine grades.  A normal tea strainer separates the medium and fine grades.  

High quality, Australian designed and handcrafted Frit Press. The Frit press has lentil mould grooves allowing you to place your frit into the grooves and shape your bead at the same time.