Glass Shaping Tools and Accessories
| Mashers | Tweezers | Graphite Paddles | Marvers | Brass Tools |
| Mini Brass
Stumper:
Brass head is 22mm x 46mm with a 150mm Stainless Steel Handle High quality Australian made Stumpers. |
|
$55.00 | |
| Brass Stumper: Brass head is 40mm x 60mm with a Stainless Steel Handle High quality Australian made Stumpers. |
|
$65.00 | |
| Shears: Shears for cutting hot, pliable glass. They are ideal for trimming the ends of hot glass rods or making cuts like petals into the glass. 15cm in length. |
|
$5.00 | |
| Glass Mashers | Individual pieces | ||
| Mini Mashers: 205mm in length. The stainless steel pads are 20mm x 20mm. |
|
$16.00 | |
| Mini Pliers
Masher:
The square stainless steel mashing surface is a 19mm square. Made with Jewellery pliers that open wider than the mini mashers above. |
|
$21.00 | |
| Angle
Masher:
OUT OF STOCK
|
|
$24.00 | |
| Deluxe BBQ Squashers:
50mm square stainless steel mashing surfaces with |
|
$60.00 | |
| Parallel
Action
Mashers: |
|
$65.00 | |
| Tiny Angle Masher Tweezers: 110mm long tweezers have small flat thin pads measuring 12 x 5mm. Excellent for tiny detail work in tight places. |
|
$6.00 | |
| Tiny Straight Masher Tweezers: 110mm long tweezers have small flat thin pads measuring 12 x 5mm. Excellent for tiny detail work in tight places. |
Picture Coming soon. |
$6.00 | |
| Medium Tweezers: 205mm length tweezers. |
|
$9.00 | |
| Large Tweezers: 252 mm length tweezers. | $10.00 | ||
| Small moulded Mashers: Creating an imprint on both sides of the leaf. Examples can be found on page 13 of Beads of Glass. |
|
$33.00 | |
| Large Moulded Mashers: Creating an imprint on both sides of the leaf. The mould is very large designed for sculpturing not small beads. |
|
$55.00 | |
| Leaf Mashers: Flat Leaf mashers with an imprint on one side and flat on the other side. |
|
$30.00 | Top |
| Curved Leaf Mashers: Flat Leaf mashers with an imprint on one side and flat on the other side. Examples can be found on page 72 of Making Glass Beads and page 30 of Beads of Glass |
|
$30.00 | |
| Paddles | Individual pieces | ||
| Graphite Paddle: Graphite paddle is approximately 50mm x 80mm |
|
$22.00 | |
| Carbon
Rods Used as reamers, shapers, pokers, holders, marvers, etc. Can be sharpened like a pencil or carve designs into it and press into hot glass. |
Picture Coming |
3.2,4.0,
4.8mm -$2.00
9.5, 12.7mm - $6.00 15.9mm- $7.00 |
|
| Bead and
Marble Mould
One side is a half sphere for creating round beads and marbles. The other side has a half cylinder that is rounded at one end and extends to the edge of the graphite at the other end to make cylindrical beads. Both sides have the mandrel grooves. Two Sizes: Small (9.5mm and 12.7 mm) Medium(15.9mm and 19mm) |
|
$33.50 | |
| Graphite Marvel: attaches to
Hot Head torch.
Photograph shows the chockadoo handcrafted version. We have a larger style also available - photo coming. |
Picture Coming |
$35.00 | |
| Graphite Desk Pad:150mm x150mm x 7mm (thickness may vary slightly) |
|
$35.00 | |
| Holy Roller: 7.6 x 12.7cm. Roll your bead over the perforated stainless steel to create a Hobnail pattern. |
|
$10.00 | |
| Grooved
Marver: 10x 5.5 1cm. Roll your bead over the surface
to create ridges, lines or diamond shapes.
|
|
$10.00 | Top
|
