Glass Shaping Tools and Accessories
| Mashers | Tweezers | Graphite Paddles | Marvers | Brass Tools |
| Oskar's
Paddle
Great for tucking the sides down when encasing, or as a mini Brass Stumper. OUT OF STOCK |
|
$55.00 | |
| Mini Brass
Stumper:
Brass head is 22mm x 46mm with a 150mm Stainless Steel Handle High quality Australian made Stumpers. OUT OF STOCK |
|
$55.00 | |
| Brass Stumper: Brass head is 40mm x 60mm with a Stainless Steel Handle High quality Australian made Stumpers. |
|
$65.00 | |
| Shears: Shears for cutting hot, pliable glass. They are ideal for trimming the ends of hot glass rods or making cuts like petals into the glass. 15cm in length. |
|
$5.00 | |
| Hot Fingers: The hot fingers have a brass handle and steel fingers. They are great for holding buttons, marbles or freeform pieces like leaves. |
|
$60.00 | |
| Glass Mashers | Individual pieces | ||
| Mini Mashers: 205mm in length. The stainless steel pads are 20mm x 20mm. |
|
$16.00 | |
| Mini Pliers
Masher:
The square stainless steel mashing surface is a 19mm square. Made with Jewellery pliers that open wider than the mini mashers above. |
|
$21.00 | |
| Angle Masher: |
|
$24.00 | |
| BBQ Squashers:
50mm square stainless steel mashing surfaces with |
|
$29.00 | |
| Deluxe BBQ Squashers:
50mm square stainless steel mashing surfaces with |
Picture Coming |
$60.00 | |
| Parallel
Action
Mashers: |
|
$42.60 | |
| 70x50cm (10mm parallel when completely closed and open up to 23mm maximum) | $65.00 | ||
| Tiny Angle Masher Tweezers: 110mm long tweezers have small flat thin pads measuring 12 x 5mm. Excellent for tiny detail work in tight places. |
|
$6.00 | |
| Tiny Straight Masher Tweezers: 110mm long tweezers have small flat thin pads measuring 12 x 5mm. Excellent for tiny detail work in tight places. |
Picture Coming soon. |
$6.00 | |
| Tweezers: Multifunctional tweezers that are great for mashing, raking or pulling your design. Approximately 11.5cm (4.5") |
|
$6.00 | Top |
| Curved Leaf Mashers: Flat Leaf mashers with an imprint on one side and flat on the other side. Examples can be found on page 72 of Making Glass Beads and page 30 of Beads of Glass |
|
$30.00 | |
| Medium Tweezers: 205mm length tweezers. |
|
$9.00 | |
| Large Tweezers: 252 mm length tweezers. | $10.00 | ||
| Small moulded Mashers: Creating an imprint on both sides of the leaf. Examples can be found on page 13 of Beads of Glass. |
|
$33.00 | |
| Large Moulded Mashers: Creating an imprint on both sides of the leaf. The mould is very large designed for sculpturing not small beads. |
|
$55.00 | |
| Leaf Mashers: Flat Leaf mashers with an imprint on one side and flat on the other side. |
|
$30.00 | Top |
| Paddles | Individual pieces | ||
| Graphite Paddle: Graphite paddle is approximately 50mm x 80mm |
|
$22.00 | |
| Graphite
Lentil Shaper A graphite paddle with two half lentil indentations on each side. Heat one side of your bead and use the lentil shaper to smooth the sides into a lovely lentil. |
|
$38.00 | |
| Bead and
Marble Mould
One side is a half sphere for creating round beads and marbles. The other side has a half cylinder that is rounded at one end and extends to the edge of the graphite at the other end to make cylindrical beads. Both sides have the mandrel grooves. Two Sizes: Small (9.5mm and 12.7 mm) (OUT OF STOCK) Medium(15.9mm and 19mm) |
|
$33.50 | |
| Kim's Cone and Vessel Shaper - excellent for shaping bi-cones. |
|
$42.00 | |
| Graphite Marvel: attaches to
Hot Head torch.
Photograph shows the chockadoo handcrafted version. We have a larger style also available - photo coming. |
|
$35.00 | |
| Graphite Desk Pad:150mm x150mm x 7mm (thickness may vary slightly) |
|
$35.00 | |
| Grooved Marver: 10x 5.5 1cm. Roll your bead over the surface to create ridges, lines or diamond shapes. |
|
$10.00 | Top
|
| Next shipment of tools expected 16 May 2006. | |||
