chockadoo © 2003 - 2013
Glass Shaping Tools and Accessories
Shears: Shears for cutting hot, pliable glass. They are ideal for trimming the ends of hot glass rods or making cuts like petals into the glass. 15cm in length.
Mini Mashers: 205mm in length. The stainless steel pads are 20mm x 20mm.
Mini Pliers Masher:
The square stainless steel mashing surface is a 19mm square. Made with Jewellery pliers that open wider than the mini mashers above.
Small moulded Mashers: Creating an imprint on both sides of the leaf. Examples can be found on page 13 of Beads of Glass.
Leaf Mashers: Flat Leaf mashers with an imprint on one side and flat on the other side.
Curved Leaf Mashers: Flat Leaf mashers with an imprint on one side and flat on the other side. Examples can be found on page 72 of Making Glass Beads and page 30 of Beads of Glass
Graphite Paddle: Graphite paddle is approximately 50mm x 80mm
Bead and Marble Mould
One side is a half sphere for creating round beads and marbles. The other side has a half cylinder that is rounded at one end and extends to the edge of the graphite at the other end to make cylindrical beads. Both sides have the mandrel grooves.
Small (9.5mm and 12.7 mm)
Medium(15.9mm and 19mm)
Graphite Marvel: attaches to Hot Head torch.
Photograph shows the chockadoo handcrafted version. We have a larger style also available - photo coming.
Graphite Desk Pad:150mm x150mm x 7mm (thickness may vary slightly)
Holy Roller: 7.6 x 12.7cm. Roll your bead over the perforated stainless steel to create a Hobnail pattern.
Grooved Marver: 10x 5.5 1cm. Roll your bead over the surface to create ridges, lines or diamond shapes.
Mini Brass Stumper:
Brass head is 22mm x 46mm with a 150mm Stainless Steel Handle High quality Australian made Stumpers.